How to Make Your AI Agent Credits Last Longer | myAgents
How to Make Your Credits Last Longer
The habits I use to run my own agent team on a tight budget, in order of how much they save.
7 min read·Updated November 16, 2026
Most companies would love for you to spend as much as you can. But as a business owner and a solo founder, I want every dollar to go as far as possible. These are the tricks I follow in my own day-to-day use of myAgents to keep costs under control. It takes some trial and error, but with a little patience and some tweaking, you can run your agentic operations team on a tight budget.
Not sure how to do this, or short on the time or the energy? This is where Partner plans pay off. You get hands-on consulting and configuration: I set it up with you, or I run it for you.
One idea explains every tip below. You pay for what an agent reads and writes, each time it runs. So there are only three ways to spend less: run less often, read less per run, or use a cheaper model for the run. The tips are in order of how much they usually save.
1. Find out where the money goes
Don't guess. Open Usage in the sidebar. The chart splits your spend By agent, By model and By activity, and the Ledger tab lists every call. Open one to see its model and what it cost. On the Billing page, Credit and spending shows what you spend per day and how long your balance will last.
Nine times out of ten, one agent or one recurring job is most of the bill. Find it first. Everything below works better when you know where to aim.
2. Slow down your schedules
This is the big one. Every scheduled run is a full, paid run, even when nothing has changed since the last one. A job that runs every hour runs 24 times a day. The same job once a day costs about one twenty-fourth as much.
So ask of every recurring job: do I really need this refreshed that often? Usually once or twice a day is plenty. It is better for your time as the boss, too. Nobody reads the same report 24 times a day.
Open Schedule in the sidebar. Scheduled run costs shows what your scheduled work costs per day, and what each job costs per run. Then open the expensive one and change Repeats: every day in place of every hour, every weekday in place of every day.
3. Match the model to the job
Each agent has a Model setting (open the agent, then Edit). There are three tiers. Fast costs about a quarter of what Balanced does. Deep costs about double.
Leave most agents on Default. On Default, recurring jobs and background check-ins already start on Fast. Conversations and dashboard refreshes use Balanced. A newly assigned task starts on Fast too, and gets moved up to Balanced on its own when the task looks complex. That is the right call most of the time, and you didn't have to make it.
Two things to know before you change it:
Picking a tier pins it for every run and reply from that agent. Pin Balanced on an agent that mostly runs recurring jobs and those runs get about four times more expensive.
Deep is for strategy and hard calls. An agent that posts status updates does not need it.
Pin Fast on agents whose work is short and well defined. If the quality drops, move it back. That is the trial and error part.
4. Brief once, completely
Every message you send is a new turn, and on every turn the agent rereads the conversation so far. Three vague messages and two corrections cost a lot more than one clear brief.
Before you send an agent to work, tell it everything it needs: what you want, who it is for, when it is due, and what good looks like. "Draft our first Instagram post, for the bakery account, friendly, under 80 words, no hashtags" is one turn. "Write a post" is the start of five.
5. Keep threads short and focused
A long thread does not get cheaper as it grows. Each new message carries the whole history with it, so turn forty costs more than turn four.
Caching softens that. When an agent rereads something it read a few minutes ago (its instructions, your team's context, the earlier messages), that reread is billed at a tenth or less of the normal price. It is the reason a quick back-and-forth is affordable at all. But the cache only lasts a few minutes. Come back after lunch and the agent pays full price to read the thread again.
Two habits follow. Send related asks in one sitting, not spread across the day. And start a new thread for a new topic, so the agent is not rereading last week's conversation to answer today's question.
6. Put a ceiling on it
Caps turn a surprise into a pause.
Spend limit on a work item. Open the item and set a cap on what it may cost across all its runs. Once it reaches the cap, that one item pauses and the rest of the team keeps working. Put one on every recurring job.
Daily spend ceiling, under Settings, Automation & spend. When your workspace reaches it, agents pause until tomorrow. A workspace admin sets it.
Pause automated work, on the same screen. Going on holiday? One switch stops a team's recurring work, dashboard refreshes and check-ins. Its agents still answer when you message them in the app.
7. Do the thinking in your own AI
If you already pay for an AI assistant like Claude, connect it under Settings, Connect your AI. From there it can read your team for free: your work items, your deliveries, your usage. Reading costs nothing. You spend credits when you make an agent, or Studio, think.
So brainstorm, outline and rewrite in your own assistant, on the subscription you already have. Then hand your agents the heavy lifting only they can do: the jobs that need your connected accounts, a schedule, or the memory of how your business works.
8. Teach them once
A mistake you correct twice is a mistake you paid for twice.
When an agent gets something wrong, tell it, and say what right looks like. Agents keep memories, and each one has a Memory section on its page. If a correction matters, add it there yourself so there is no doubt it stuck.
The same goes for your team. Project context (under Settings) is what every agent reads on every run: who your customers are, how you price, what you never say. A good one saves a lot of back-and-forth, because agents stop asking and stop guessing.
Keep it tight, though. Because every agent reads it on every run, every paragraph in it is paid for again and again. Cut what is stale. The editor warns you when it gets heavy.
9. Pick the right format for the job
There are three ways to get the same information, and they do not cost the same.
A chat costs you every time you ask. Good for one-off questions.
A scheduled report costs one run per cycle, and you get it whether you read it or not.
A dashboard (on Pro) is free to look at. You pay when it refreshes, and its header shows what the scheduled refreshes add up to per month.
If you ask the same question every morning, a dashboard that refreshes once a day will beat asking every time. If you check a number once a month, just ask. Try each and watch what it does to your Usage.
10. Small things that add up
Tagging @all makes every agent in the chat reply, and each reply is its own paid run. Tag the one agent whose job it is.
Give each agent only the connections its job needs. The more an agent is connected to, the more it has to read before it starts.
Video is the most expensive thing an agent can make. Keep a dollar amount in Check with me before pricey videos, so the agent asks first.
Interactions in the sidebar shows which agents work together and which are busiest. Its Refresh spends a small amount of credit, so press it when you want a fresh look, not out of habit.
The short version
Look at Usage. Slow your schedules down. Leave models on Default unless you have a reason. Brief once and completely. Cap every recurring job. You stay the boss, and the budget stays yours to set.
Try it on your own work
Hire your first team in about two minutes. $10 in free credits, no credit card required.
Usually recurring work. Every scheduled run is a full paid run, even when nothing changed, so a job that runs every hour costs about 24 times what the same job costs once a day. Long chat threads add up too, because each new message carries the whole conversation with it. The Usage page shows your own split by agent, by model and by activity.
Which model should my agents use?
Leave most agents on Default. Recurring jobs and background check-ins then start on the Fast model, conversations and dashboard refreshes use Balanced, and a newly assigned task is moved up to Balanced on its own when it looks complex. Fast costs about a quarter of Balanced and Deep about double, so pin Fast for short, well-defined work and keep Deep for strategy and hard decisions.
Does a longer conversation cost less per message?
No. Each message resends the conversation so far, so later turns cost more than early ones. Caching discounts the part the agent read within the last few minutes to a tenth or less of the normal price, which keeps a quick back-and-forth affordable, but the discount runs out when you step away. Send related asks together and start a new thread for a new topic.
How do I stop an agent from overspending?
Set a Spend limit on the work item: when the item reaches it, that item pauses and everything else keeps running. A daily spend ceiling for the whole workspace sits under Settings, Automation & spend, next to a switch that pauses a team's automated work. Usage never bills your card: credits are prepaid, and agents pause when you run out. The only automatic charges are your plan renewal, if you subscribe, and auto-reload, if you turn it on.
Does connecting my own AI assistant cost credits?
The connection is free and so is reading through it: your teams, work items, deliveries and usage. You spend credits when you make an agent, or Studio, think: each message to an agent is a full agent run.
See the team built for you
myAgents ships ready-made teams tuned to how you work: